In Legnica, Poland, Inspol employees rehabilitated a 32 m long stretch of defective concrete pipes with a diameter of 400 mm. The extremely flexible BRAWOLINER® 3D 300-400 and the BRAWO®TC epoxy resin were used.
The challenge of this installation was mainly the long stretch across 32 metres and the fact that the temperatures were quite high at the time of the rehabilitation. This requires a fast and precise procedure, as the resin reacts faster at higher temperatures. The liner therefore had to be impregnated and installed quickly – with such a long stretch, this requires experienced, professional installers who have enough experience and know about the risks. The BRAWO® TC was cured with hot water. In just eight hours, the four Inspol employees were able to declare the construction site finished again.
Interesting facts about the products used and BRAWO® Systems
BRAWOLINER®
BRAWO® SYSTEMS is the only company to produce seamless textile hoses for the rehabilitation of defective pipes, also in small nominal diameters. Due to a special loop construction, the BRAWOLINER® are extremely flexible. This makes them the ideal rehabilitation solution for defective pipes with bends up to 90° and up to two dimensional changes. With a service life of over 50 years, BRAWOLINER® is an economical and environmentally friendly alternative to open construction!
BRAWO® TC
Optimised for use with the BRAWOLINER® DN 300-400. Both epoxy resins can be cold or warm cured.
BRAWO® Systems offers a complete and high-quality range for the rehabilitation of defective pipes for both building and property drainage. The aim of BRAWO® Systems is to guarantee its customers maximum flexibility on construction sites for building and site drainage, which are often difficult to plan.
The BRAWO®Tech division comprises high-tech products and tools for the installation of the BRAWOLINER. Furthermore, high-quality vehicle upgrades are offered.
The BRAWO® Academy rounds off the portfolio: a comprehensive training and development programme offers various seminars and workshops all about rehabilitation practice, planning, feasibility studies, standards and sets of rules.
Your press contact:
Pressekontakt BRAWO SYSTEMS GmbH
Gunter Kaltenhäuser
Blechhammerweg 13-17
67659 Kaiserslautern
Deutschland
Tel.: +49 631 20561 – 260
E-Mail: gunter.kaltenhaeuser(at)brawosystems.com
www.brawosystems.com
