Curing of BRAWO® resins

BRAWO® epoxy resins can cure at ambient temperature.

The addition of heat can significantly reduce the curing time. BRAWO® SYSTEMS offers reliable heating units, for curing acceleration using water, steam or UV/LED light, that rapidly pay for themselves.

Hot Water Curing

Curing with Hot Water

BRAWO® HotBox VHQ

The BRAWO® HotBox VHQ is a diesel-powered continuous heater specially designed for domestic sewer renovation. Thanks to the high heating output, up to 3000 litres of water can be heated per hour.

The mobile unit can be easily transported and can be operated outdoors close to the rehabilitation site.

Advantages of the BRAWO® HotBox VHQ

  • Oil or diesel-fired flow-type heater
  • Mobile heating device
  • Water capacity can exceed 3000 l/h
  • Temperatures of up to 80 °C
  • Fast heat-up time: 1800 l/hr filling capacity at 50 °C
Technical Data
Voltage:230 V/50 Hz
Water throughput l/hr (min./max.):1800/3000
Filling capacity at 50 °C  l/hr:1800
Temperature: up to 80 °C
Burner output:90 kW
Dimensions (L x W x H mm):840 x 650 x 960
Weight:105 kg
Max. operating pressure:20 bar

Accesoires BRAWO® Hotbox VHQ

BRAWO® Circulation Pump HP 1200 and Basic 840

During warm curing, the BRAWO® HotBox HQ/HotBox L is connected to the inversion drum and warm water is fed into the liner. The necessary circulation between the liner and BRAWO® HotBox HQ/HotBox L is provided by a special pump, which is designed for use with hot water.

Advantages of BRAWO® Circulation Pumps

  • Increased safety during liner installation, thanks to faster and more-uniform distribution of heat
  • High efficiency thanks to short curing time
  • More reliable installation

Hose set (water)

  • 2 x 10 m and 1 x 2 m water hoses with GEKA couplings
← BRAWO® HotBox HQ