Curing of BRAWO® resins
BRAWO® epoxy resins can cure at ambient temperature. The addition of heat can significantly reduce the curing time.
This can be implemented in the form of hot water or steam. BRAWO® SYSTEMS offers reliable heating units, both for curing acceleration using water or steam, that rapidly pay for themselves.
Steam Curing
In addition to curing resin-impregnated liners for domestic sewer rehabilitation with hot water, steam curing has also established itself.
This is particularly the case for the renovation of downpipes, where water curing is only possible in shorter pipe sections with approx. 4 metres height difference. Steam curing has significant advantages in this case.
BRAWO® SteamGenerator ULX50 Diesel
Steam Curing
The new BRAWO® SteamGenerator ULX50 Diesel is particularly distinguished by its low weight and mobility – a flexible use at the working site is easily possible.
Advantages of the BRAWO® SteamGenerator ULX50 Diesel
- Diesel-fired flow-type heater
- Mobile heating device
- Temperature up to 120°C
- Low warm-up time of 2 – 3 minutes
- Optionally available water softener and replacement cartridges
- Easy to maintain and repair thanks to large service doors
- User-friendly thanks to digital display with error code display
- Operating hours display
- larger tank (diesel & water 36l with level indicator)
- secure stand thanks to 4 wheels, 2 x lockable and 2 x with casters
| Technical Data | |
|---|---|
| Steam capacity: | ca. 50 kg/h |
| Steam power: | 29000 W |
| Steam pressure: | 9 bar |
| Steam temperature: | ca. 120 °C |
| Weight: | 93 kg |
| Dimensions (L x W x H mm): | 1110 x 650 x 900 |
