BRAWO® Inversion Drums

The inversion process is decisive for the rehabilitation result. The liner can only conform to the pipe wall when it is inverted with a constant and uniform pressure. BRAWO® SYSTEMS offers professional high quality inversion drums.

The best stainless steel, high quality workmanship and clever design enable an optimal result and professional operation over the long-term.

BRAWO® Drum 4.0

BRAWO® Drum 4.0: the one for everything!

The BRAWO® Drum 4.0 is characterised by its high flexibility in terms of its possible applications. It has universal connection options, such as for the BRAWO® Magnavity SX light curing system. The chassis design has been optimised so that the drum can be positioned directly above the respective shaft.

A large handwheel provides better control when inverting the liner. In addition, the drum comes in a robust stainless steel design suitable for construction sites.

Due to the camlock coupling, accessories such as inversion bends can be attached continuously at different angles. The angle of the drum output can also be adjusted in any axis-centered manner.

All positions are possible from vertically downwards (directly above a shaft) to vertically upwards (downpipe with access from the basement).

The new innovative BRAWO® Drum 4.0 is a universally applicable inversion drum for all four curing methods:

  • Curing at ambient temperature
  • Hot curing with water and steam
    due to the rotary joint on the drum axle and the drain valve, an even simpler setup of the circulation is possible, the curing can be accelerated by water or steam.
  • Curing with UV/LED light
    the adaptation of the light source is now possible without an additional lock. from the beginning of the inversion to the completion of the curing, the liner remains continuously under pressure.
Capacity of the BRAWO® Drum 4.0
  With water hose, ¾With water hose and calibration hose
Drum volume109.45 L  
Weightapprox. 65 kg  
L x W x H (cm)105 x 76 x 105  
DN 50200 m95 m–
DN 70120 m95 m54 m
DN 10072 m56 m36 m
DN 12557 m44 m29 m
DN 15048 m37 m25 m
DN 20035 m27 m17 m
DN 300–––

Accessories BRAWO® Inversion Drums - Flexible and Robust

Inversion Pipes

  • Straight and bent
  • Coupling Storz F-205, F-150 and A-110
  • Diameters (mm) 50, 70, 100/120, 150, 200, 300

Inversion hoses

  • for flexible extension of the inversion pipes
  • Storz coupling F-205, F-150 and A-110
  • Lengths 0.5 m, 1 m, 2 m, 3 m; Different lengths possible

Retaining strap

  • Sturdy flat cord for control and secure regulation of the inversion speed

Adapter Camlock – Storz

  • For connecting the accessories with Storz coupling

Blind coupling F150 (water)

  • If several liners need closing off, the use of a blind coupling is recommended. This makes it possible to separate the pressure drum after inversion from the inversion bend and maintain the liner under pressure until it has completed curing
  • 2 connections for air/water

BRAWO® Tripod for Water Column Inversion for DN 200 and DN 300

  • Installation device for inversion using hydrostatic pressure (water column)

GEKA water hose connection and plastic lip

  • Integrated water hose connection with GEKA coupling
  • Plastic lip prevents damage to the liner
BRAWO® Inversion Drum DN 800 XL →