AIRBAGLINER®
To make steam curing even easier and faster, BRAWO® SYSTEMS now offers the AIRBAGLINER® supplied by Bodenbender GmbH.
Product Features
- From DN 50 to DN 400
- Very high flexibility and an extreme sliding capacity
- Simplifies the inversion process even in pipes with small diameters and changes of direction
- Heat-resistant up to 150 °C, can be removed in less than 60 minutes
- The retraction process is made much easier by the high sliding capacity
- Pressure resistance of up to 2 bar
- Particularly suitable for negotiating bends
- Can be reused up to 6 times
AIRBAGLINER® und BRAWO® SteamGenerator ULX50 Diesel: A perfect team
BRAWO® SteamGenerator ULX50 Diesel
- Diesel-fired flow-type heater
- Mobile heating device
- Temperature up to 120°C
- Low warm-up time of 2-3 minutes
- Optionally available water softener and replacement cartridges
- Easy to maintain and repair thanks to large service doors
- User-friendly thanks to digital display with error code display
- Operating hours display
- larger tank (diesel & water 36l with level indicator)
- secure stand thanks to 4 wheels, 2 x lockable and 2 x with casters
Calibration Hoses
Calibration hose is used as a support tube for installing the liner in the pipe being rehabilitated. Rehabilitation with open end is recommended where there is no possibility to open the sealed liner or if just a section of the pipe needs rehabilitation.
- From DN 80 to DN 400
- Calibration hoses for various temperature ranges
- PVC material with PES fabric insert
- Good bend flexibility up to 45°
Preliner
Flexible Film Tube
Preliners are used as an outer foil between the liner and the old pipe if bonding with the old pipe is not required or in the case of rehabilitation in zones saturated with groundwater (DIBt requirement).
- From DN 100 to DN 300
- Flexible film tube made of PE
- Material thickness approx. 150 μm
- Can be used for bends up to 90°
